2306
Materials: Natural woods, composite woods, hard plastics
Recommended RPM: 13,000-15,000 (max 16,000)
This chamfer bit is designed to cut a 45 degree angle on your work piece. Whether you are using the 45° as a decorative edge or making mitered corners, the two flute carbide tipped design will give you an accurate cut every time.
Part # | Degree of Angle | Cutting Length | Cutting Height | Large Dia. |
---|---|---|---|---|
1/4" SHANK | ||||
* 2292 | 45° | 7/16" | 5/16" | 1" |
2302 | 45° | 5/8" | 7/16" | 1-3/8" |
1/2" SHANK | ||||
2305 | 45° | 5/8" | 7/16" | 1-3/8" |
2306 | 45° | 1-1/16" | 3/4" | 2" |
2310 | 45° | 1-1/2" | 1-1/16" | 2-5/8" |
Bearing Number: B3 (Use B2 on #2292)
* 2292 has 1" large diameter for use in trim routers
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 13,000-15,000 (max 18,000) These bits have a +5° angle on the cutting edge and were made specifically for cutting the... View full product details
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 13,000-15,000 (max 18,000) These bits have a -5° angle on the cutting edge and were made specifically for cutting the... View full product details
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Leigh® #101 - 8mm shank. Dovetail joints have traditionally stood as a mark of... View full product details
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Incra®/Leigh® #101. Also compatible with JoinTech™ system. Dovetail joints have traditionally stood as a... View full product details