2292
45° Chamfer Bit
1/4"SH, 45°, 7/16"CL
Product Description
Materials: Natural woods, composite woods, hard plastics
Recommended RPM: 14,000-16,000 (max 18,000)
This chamfer bit is designed to cut a 45 degree angle on your work piece. Originally, the bit was specifically designed to fit in trim routers with its 1" large diameter. Whether you are using the 45° as a decorative edge or making mitered corners, the two flute carbide tipped design will give you an accurate cut every time.
- TOOL SPECS: Carbide-tipped 45° chamfer bit with 45° angle, 7/16" cutting length, 5/16" cutting height, 1/4" shank, and 1" large diameter for use with 1/4" collets.
- CHAMFER: Ideal for creating a 45-degree beveled edge on workpieces, ensuring precise, clean cuts on both sides for a professional finish on various woodworking projects.
- TRIM ROUTER COMPATIBLE: The 1" large diameter easily fits through the base plate on small trim routers, making it ideal for removing sharp wedges or visual detail when using smaller routers.
- BEARING GUIDE: A bearing guide is located on the end of the bit, ensuring precise cuts and optimal performance for your projects.
- CARBIDE TIPPED: Offers an excellent balance of quality and cost, making it ideal for a wide range of applications.
- STEEL SHANK: The steel body creates a rigid tool with reduced vibration while the carbide cutting edges provide extended life.
Similar Sizes
| Part # | Degree of Angle | Cutting Length | Cutting Height | Large Dia. |
|---|---|---|---|---|
| 1/4" SHANK | ||||
| * 2292 | 45° | 7/16" | 5/16" | 1" |
| 2302 | 45° | 5/8" | 7/16" | 1-3/8" |
| 1/2" SHANK | ||||
| 2305 | 45° | 5/8" | 7/16" | 1-3/8" |
| 2306 | 45° | 1-1/16" | 3/4" | 2" |
| 2310 | 45° | 1-1/2" | 1-1/16" | 2-5/8" |
Bearing Number: B3 (Use B2 on #2292)
* 2292 has 1" large diameter for use in trim routers
Related Items
+5° Chairmaking Rabbet
1/2"SH, 1" CD, 5/8"CL
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 13,000-15,000 (max 18,000) These bits have a +5° angle on the cutting edge and were made specifically for cutting the... View full product details
-5° Chairmaking Rabbet
1/2"SH, 1" CD, 5/8"CL
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 13,000-15,000 (max 18,000) These bits have a -5° angle on the cutting edge and were made specifically for cutting the... View full product details
10° Dovetail Bit
8mm SH, 1/2"LD, 5/8"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Leigh® #101 - 8mm shank. Dovetail joints have traditionally stood as a mark of... View full product details
10° Dovetail Bit
1/4"SH, 1/2"LD, 5/8"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Incra®/Leigh® #101. Also compatible with JoinTech™ system. Dovetail joints have traditionally stood as a... View full product details
