2062
Plunge Roundover Bit
1/2"SH, 9/16"R, 1-5/8"LD, 1/2"SD
Product Description
Plunge Roundovers can cut a flat bottom while providing that traditional roundover edge. These bits can also be used to cut out your project, leaving only the traditional roundover edge on the side of your workpiece.
Materials: Natural woods, composite woods, hard plastics
Recommended RPM: 13,000-15,000 (max 16,000)
Similar Sizes
| Part # | Radius | Large Dia. | Small Dia. | Pattern Length |
|---|---|---|---|---|
| 1/4" SHANK | ||||
| 2050 | 1/8" | 3/8" | 1/8" | 1/4" |
| 2051 | 3/16" | 5/8" | 1/4" | 1/8" |
| 2052 | 1/4" | 3/4" | 1/4" | 3/8" |
| 1/2" SHANK | ||||
| 2055 | 1/4" | 3/4" | 1/4" | 1/4" |
| 2056 | 1/4" | 3/4" | 1/4" | 3/8" |
| 2057 | 3/8" | 1" | 1/4" | 5/16" |
| 2058 | 3/8" | 1" | 1/4" | 9/16" |
| 2060 | 1/2" | 1-3/8" | 3/8" | 3/4" |
| 2062 | 9/16" | 1-5/8" | 1/2" | 1" |
| 2064 | 5/8" | 1-3/4" | 1/2" | 1-1/16" |
| 2066 | 3/4" | 2" | 1/2" | 1-1/8" |
Roundover & Edge Trim (Long Nose)
| Part # | Radius | Large Dia. | Small Dia. | Pattern Length |
|---|---|---|---|---|
| 1/2" SHANK | ||||
| * 2068 | 3/16" | 1" | 1/2" | 13/16" |
| ** 2070 | 3/16" | 1" | 1/2" | 1-5/16" |
| * 2072 | 1/4" | 1-1/8" | 1/2" | 13/16" |
| ** 2074 | 1/4" | 1-1/8" | 1/2" | 1-5/16" |
| * 2076 | 3/8" | 1-3/8" | 1/2" | 13/16" |
| ** 2078 | 3/8" | 1-3/8" | 1/2" | 1-5/16" |
* Edge Trim for 3/4" stock. ** Edge Trim for 1-1/4" stock
Related Items
Plunge Roundover Bit
1/4"SH, 1/8"R, 3/8"LD, 1/8"SD
Plunge Roundovers can cut a flat bottom while providing that traditional roundover edge. These bits can also be used to cut out your project, leaving only the... View full product details
Plunge Roundover Bit
1/4"SH, 3/16"R, 3/8"CL
Plunge Roundovers can cut a flat bottom while providing that traditional roundover edge. Small Grooving Bits such as the Plunge Roundover are commonly used for decorative designs... View full product details
Plunge Roundover Bit
1/4"SH, 1/4"R, 3/4"LD, 1/4"SD
Plunge Roundovers can cut a flat bottom while providing that traditional roundover edge. These bits can also be used to cut out your project, leaving only the... View full product details
Plunge Roundover Bit
1/2"SH, 1/4"R, 3/4"LD, 1/4"SD
Plunge Roundovers can cut a flat bottom while providing that traditional roundover edge. These bits can also be used to cut out your project, leaving only the... View full product details
