2060

Plunge Roundover Bit

1/2"SH, 1/2"R, 1-3/8"LD, 3/8"SD

Product Information

Plunge Roundovers can cut a flat bottom while providing that traditional roundover edge. These bits can also be used to cut out your project, leaving only the traditional roundover edge on the side of your workpiece.

Part # Radius Large Dia. Small Dia. Pattern Length
1/4" SHANK
2050 1/8" 3/8" 1/8" 1/4"
2051 3/16" 5/8" 1/4" 1/8"
2052 1/4" 3/4" 1/4" 3/8"
1/2" SHANK
2055 1/4" 3/4" 1/4" 1/4"
2056 1/4" 3/4" 1/4" 3/8"
2057 3/8" 1" 1/4" 5/16"
2058 3/8" 1" 1/4" 9/16"
2060 1/2" 1-3/8" 3/8" 3/4"
2062 9/16" 1-5/8" 1/2" 1"
2064 5/8" 1-3/4" 1/2" 1-1/16"
2066 3/4" 2" 1/2" 1-1/8"

Roundover & Edge Trim (Long Nose)

Part # Radius Large Dia. Small Dia. Pattern Length
1/2" SHANK
*   2068 3/16" 1" 1/2" 13/16"
** 2070 3/16" 1" 1/2" 1-5/16"
*   2072 1/4" 1-1/8" 1/2" 13/16"
** 2074 1/4" 1-1/8" 1/2" 1-5/16"
*   2076 3/8" 1-3/8" 1/2" 13/16"
** 2078 3/8" 1-3/8" 1/2" 1-5/16"

* Edge Trim for 3/4" stock.  ** Edge Trim for 1-1/4" stock