2051
Plunge Roundover Bit
1/4"SH, 3/16"R, 3/8"CL
Product Description
Plunge Roundovers can cut a flat bottom while providing that traditional roundover edge. Small Grooving Bits such as the Plunge Roundover are commonly used for decorative designs in cabinet doors or for detail veining in furniture. Round Nose Bits and V-Groove Bits are often used in the same manner. The larger Grooving Bits are great for a raised panel effect in doors and for adding a bold accent to furniture or large work pieces. These bits also make nice edge profiles with the aid of a router table and fence.
Materials: Natural woods, composite woods, hard plastics
Recommended RPM: 16,000-18,000 (max 24,000)
PDF Instructions
PDF Instructions 2
Similar Sizes
Roundover & Edge Trim (Long Nose)
| Part # | Radius | Large Dia. | Small Dia. | Pattern Length |
|---|---|---|---|---|
| 1/2" SHANK | ||||
| * 2068 | 3/16" | 1" | 1/2" | 13/16" |
| ** 2070 | 3/16" | 1" | 1/2" | 1-5/16" |
| * 2072 | 1/4" | 1-1/8" | 1/2" | 13/16" |
| ** 2074 | 1/4" | 1-1/8" | 1/2" | 1-5/16" |
| * 2076 | 3/8" | 1-3/8" | 1/2" | 13/16" |
* Edge Trim for 3/4" stock. ** Edge Trim for 1-1/4" stock
Roundover & Edge Trim (Traditional)
| Part # | Radius | Large Dia. | Small Dia. | Pattern Length |
|---|---|---|---|---|
| 1/4" SHANK | ||||
| 2050 | 1/8" | 3/8" | 1/8" | 1/4" |
| 2051 | 3/16" | 5/8" | 1/4" | 1/8" |
| 2052 | 1/4" | 3/4" | 1/4" | 3/8" |
| 1/2" SHANK | ||||
| 2055 | 1/4" | 3/4" | 1/4" | 1/4" |
| 2056 | 1/4" | 3/4" | 1/4" | 3/8" |
| 2057 | 3/8" | 1" | 1/4" | 5/16" |
| 2058 | 3/8" | 1" | 1/4" | 9/16" |
| 2060 | 1/2" | 1-3/8" | 3/8" | 3/4" |
| 2062 | 9/16" | 1-5/8" | 1/2" | 1" |
| 2064 | 5/8" | 1-3/4" | 1/2" | 1-1/16" |
| 2066 | 3/4" | 2" | 1/2" | 1-1/8" |
Related Items
Plunge Roundover Bit
1/4"SH, 1/8"R, 3/8"LD, 1/8"SD
Plunge Roundovers can cut a flat bottom while providing that traditional roundover edge. These bits can also be used to cut out your project, leaving only the... View full product details
Plunge Roundover Bit
1/4"SH, 1/4"R, 3/4"LD, 1/4"SD
Plunge Roundovers can cut a flat bottom while providing that traditional roundover edge. These bits can also be used to cut out your project, leaving only the... View full product details
Plunge Roundover Bit
1/2"SH, 1/4"R, 3/4"LD, 1/4"SD
Plunge Roundovers can cut a flat bottom while providing that traditional roundover edge. These bits can also be used to cut out your project, leaving only the... View full product details
Plunge Roundover Bit
1/2"SH, 1/4"R, 3/4"LD, 1/4"SD
Plunge Roundovers can cut a flat bottom while providing that traditional roundover edge. These bits can also be used to cut out your project, leaving only the... View full product details
