Products
DownloadCatalog(PDF)
+5° Chairmaking Rabbet
1/2"SH, 1" CD, 5/8"CL
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 13,000-15,000 (max 18,000) These bits have a +5° angle on the cutting edge and were made specifically for cutting the... View full product details
-5° Chairmaking Rabbet
1/2"SH, 1" CD, 5/8"CL
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 13,000-15,000 (max 18,000) These bits have a -5° angle on the cutting edge and were made specifically for cutting the... View full product details
1/2" Bearing Lock Collar
Retaining Collars for use when bearings are added to the shanks of router bits for following templates. These collars are manufactured for 1/2" shanks and use a 1/16" hex key.... View full product details
1/4" Bearing Lock Collar
Retaining Collars for use when bearings are added to the shanks of router bits for following templates. These collars are manufactured for 1/4" shanks and use a 1/16" hex key.... View full product details
10° Dovetail Bit
8mm SH, 1/2"LD, 5/8"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Leigh® #101 - 8mm shank. Dovetail joints have traditionally stood as a mark of... View full product details
10° Dovetail Bit
1/4"SH, 1/2"LD, 5/8"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Incra®/Leigh® #101. Also compatible with JoinTech™ system. Dovetail joints have traditionally stood as a... View full product details
10° Dovetail Bit
1/2"SH, 1/2"LD, 5/8"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Incra®and JoinTech™ systems. Dovetail joints have traditionally stood as a mark of craftsmanship to... View full product details
120° V-Groove Bit
1/4"SH, 3/4"CD, 7/32"PL
Materials: Natural woods, composite woods, hard plastics, thin aluminum Recommended RPM: 14,000-16,000 (max 18,000) V-Groove bits are used for a variety of projects where... View full product details
120° V-Groove Bit
1/2"SH, 3/4"CD, 7/32"PL
Materials: Natural woods, composite woods, hard plastics, thin aluminum Recommended RPM: 14,000-16,000 (max 18,000) V-Groove bits are used for a variety of projects where... View full product details
120° V-Groove Bit
1/2"SH, 1-1/2"CD, 7/16"PL
Materials: Natural woods, composite woods, hard plastics, thin aluminum Recommended RPM: 14,000-16,000 (max 18,000) V-Groove bits are used for a variety of projects where... View full product details
14° Dovetail Bit
1/2"SH, 1"LD, 7/8"DOC
Materials: Natural woods, composite woods Recommended RPM: 14,000-16,000 (max 18,000) Dovetail joints have traditionally stood as a mark of craftsmanship to the woodworker. The interlocking... View full product details
14° Dovetail Bit
1/4"SH, 3/8"LD, 3/8"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) Dovetail joints have traditionally stood as a mark of craftsmanship to the woodworker. The interlocking... View full product details
14° Dovetail Bit
1/4"SH, 1/2"LD, 1/2"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Incra®/OmniJig® 43705. Also compatible with JoinTech™ system. Dovetail joints have traditionally stood as a... View full product details
14° Dovetail Bit
1/4"SH, 1/2"LD, 1/2"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Leigh® #120 Dovetail joints have traditionally stood as a mark of craftsmanship to the woodworker.... View full product details
14° Dovetail Bit
8mm SH, 1/2"LD, 1/2"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Leigh® #120 - 8mm shank. Dovetail joints have traditionally stood as a mark of... View full product details
14° Dovetail Bit
1/4"SH, 17/32"LD, 1/2"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Incra® and JoinTech™ systems. Dovetail joints have traditionally stood as a mark of craftsmanship to... View full product details
14° Dovetail Bit
1/2"SH, 1/2"LD, 1/2"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Incra®/OmniJig® 43750. Also compatible with JoinTech™ system. Dovetail joints have traditionally stood as a... View full product details
14° Dovetail Bit
1/2"SH, 3/4"LD, 3/4"DOC
Materials: Natural woods, composite woods Recommended RPM: 14,000-16,000 (max 18,000) For OmniJig® 43774. Dovetail joints have traditionally stood as a mark of craftsmanship to the... View full product details
15° Engraving Bit
1/16" Flat Point, 1/4"SH,
Materials: Natural woods, composite woods, hard plastics, soft plastics Recommended RPM: 18,000-20,000 (max 24,000) This small 1/4" Engraving Bit is a great tool for making a... View full product details
15° Engraving Bit
3/32" x 45° POINT, 1/4" SH
Materials: Natural woods, composite woods, hard plastics, soft plastics Recommended RPM: 18,000-20,000 (max 24,000) This small 1/4" Engraving Bit is a great tool for making a... View full product details
15° Shaker Stile & Rail Set
1/2"SH, 13/16"CL, 1-5/8"LD
Materials: Natural woods, composite woods Recommended RPM: 12,000-14,000 (max 16,000) Featuring a 15° Shaker Pattern, this set is for cabinet door construction with actual... View full product details
15° Shaker Stile & Rail Set
1/2"SH, 13/16"CL, 1-5/8"LD
Materials: Natural woods, composite woods Recommended RPM: 12,000-14,000 (max 16,000) Featuring a 15° Shaker Pattern, this set is for cabinet door construction with undersized... View full product details
18° Dovetail Bit
8mm SH, 1/2"LD, 3/8"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Leigh® #128 - 8mm shank. Dovetail joints have traditionally stood as a mark of craftsmanship... View full product details
18° Dovetail Bit
1/4"SH, 1/2"LD, 3/8"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Leigh® #128. Dovetail joints have traditionally stood as a mark of craftsmanship to the woodworker.... View full product details
22° Carving Liner
1/4"SH, 5/8"CL
Materials: Natural woods, composite woods, hard plastics, soft plastics Recommended RPM: 18,000-20,000 (max 24,000) This small 1/4" Carving Liner bit is a great tool for making... View full product details
27° Straight Medium Raised Panel
1/2"SH, 5/8"CL, 2-1/2"LD
Materials: Natural woods, composite woods Recommended RPM: 10,000-12,000 (max 12,000) These bits cut a 1” wide pattern and are often used for general edge... View full product details
3-Wing Composite Drill
1/2" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
9/16" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
5/8" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
11/16" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
3/4" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
13/16" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
7/8" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
15/16" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
1" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
1-1/16" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
1-1/8" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
1-1/4" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
1-5/16" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
1-3/8" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
1-7/16" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
1-1/2" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
1-5/8" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
1-3/4" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
1-7/8" dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
2" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
2-1/8" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Composite Drill
2-1/4" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
