Products
DownloadCatalog(PDF)
3-Wing Composite Drill
2-1/2" Dia.
These 3-wing carbide tipped drills are designed for extended life in fiberglass and other composites. The 7/16” hex shank provides a no-slip grip when used with a standard three jaw... View full product details
3-Wing Drills
11/16" Dia.
Bores clean accurate holes in wood, plastic laminates, Formica™, and Masonite™. Carbide tipped for long life even in abrasive materials. The outside spurs outline the hole and help prevent fraying,... View full product details
3-Wing Drills
3/4" Dia.
Bores clean accurate holes in wood, plastic laminates, Formica™, and Masonite™. Carbide tipped for long life even in abrasive materials. The outside spurs outline the hole and help prevent fraying,... View full product details
3-Wing Drills
13/16" Dia.
Bores clean accurate holes in wood, plastic laminates, Formica™, and Masonite™. Carbide tipped for long life even in abrasive materials. The outside spurs outline the hole and help prevent fraying,... View full product details
3-Wing Drills
7/8" Dia.
Bores clean accurate holes in wood, plastic laminates, Formica™, and Masonite™. Carbide tipped for long life even in abrasive materials. The outside spurs outline the hole and help prevent fraying,... View full product details
3-Wing Drills
1" Dia.
Bores clean accurate holes in wood, plastic laminates, Formica™, and Masonite™. Carbide tipped for long life even in abrasive materials. The outside spurs outline the hole and help prevent fraying,... View full product details
3-Wing Drills
1-1/8" Dia.
Bores clean accurate holes in wood, plastic laminates, Formica™, and Masonite™. Carbide tipped for long life even in abrasive materials. The outside spurs outline the hole and help prevent fraying,... View full product details
3-Wing Drills
1-1/4" Dia.
Bores clean accurate holes in wood, plastic laminates, Formica™, and Masonite™. Carbide tipped for long life even in abrasive materials. The outside spurs outline the hole and help prevent fraying,... View full product details
3-Wing Drills
1-3/8" Dia.
Bores clean accurate holes in wood, plastic laminates, Formica™, and Masonite™. Carbide tipped for long life even in abrasive materials. The outside spurs outline the hole and help prevent fraying,... View full product details
3-Wing Drills
1-1/2" Dia.
Bores clean accurate holes in wood, plastic laminates, Formica™, and Masonite™. Carbide tipped for long life even in abrasive materials. The outside spurs outline the hole and help prevent fraying,... View full product details
3-Wing Drills
1-5/8" Dia.
Bores clean accurate holes in wood, plastic laminates, Formica™, and Masonite™. Carbide tipped for long life even in abrasive materials. The outside spurs outline the hole and help prevent fraying,... View full product details
3-Wing Drills
1-3/4" Dia.
Bores clean accurate holes in wood, plastic laminates, Formica™, and Masonite™. Carbide tipped for long life even in abrasive materials. The outside spurs outline the hole and help prevent fraying,... View full product details
3-Wing Drills
1-7/8" Dia.
Bores clean accurate holes in wood, plastic laminates, Formica™, and Masonite™. Carbide tipped for long life even in abrasive materials. The outside spurs outline the hole and help prevent fraying,... View full product details
3-Wing Drills
2" Dia.
Bores clean accurate holes in wood, plastic laminates, Formica™, and Masonite™. Carbide tipped for long life even in abrasive materials. The outside spurs outline the hole and help prevent fraying,... View full product details
3-Wing Drills
2-1/8" Dia.
Bores clean accurate holes in wood, plastic laminates, Formica™, and Masonite™. Carbide tipped for long life even in abrasive materials. The outside spurs outline the hole and help prevent fraying,... View full product details
3-Wing Drills
2-1/4" Dia.
Bores clean accurate holes in wood, plastic laminates, Formica™, and Masonite™. Carbide tipped for long life even in abrasive materials. The outside spurs outline the hole and help prevent fraying,... View full product details
3-Wing Drills
2-1/2" Dia.
Bores clean accurate holes in wood, plastic laminates, Formica™, and Masonite™. Carbide tipped for long life even in abrasive materials. The outside spurs outline the hole and help prevent fraying,... View full product details
30° Engraving Bit
Pencil Point, 1/4"SH
Materials: Natural woods, composite woods, hard plastics, soft plastics Recommended RPM: 18,000-20,000 (max 24,000) Engraving bit for small CNC machines, different angles of bits can be... View full product details
30° Engraving Bit
1/32" Flat Point, 1/4"SH
Materials: Natural woods, composite woods, hard plastics, soft plastics Recommended RPM: 18,000-20,000 (max 24,000) Engraving bit for small CNC machines, different angles of bits can be... View full product details
45° Chamfer Bit
1/4"SH, 45°, 7/16"CL
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 14,000-16,000 (max 18,000) This chamfer bit is designed to cut a 45 degree angle on your work piece. Originally, the bit... View full product details
45° Chamfer Bit
1/4"SH, 45°, 5/8"CL
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 13,000-15,000 (max 18,000) This chamfer bit is designed to cut a 45-degree angle on your work piece. Whether you are... View full product details
45° Chamfer Bit
1/2"SH, 45°, 5/8"CL
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 13,000-15,000 (max 18,000) This chamfer bit is designed to cut a 45 degree angle on your work piece. Whether... View full product details
45° Chamfer Bit
1/2"SH, 45°, 1-1/16"CL
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 13,000-15,000 (max 16,000) This chamfer bit is designed to cut a 45 degree angle on your work piece.... View full product details
45° Chamfer Bit
1/2"SH, 45°, 1-1/2"CL
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 10,000-12,000 (max 12,000) This chamfer bit is designed to cut a 45 degree angle on your work piece.... View full product details
45° Engraving Bit
Pencil Point, 1/4"SH
Materials: Natural woods, composite woods, hard plastics, soft plastics Recommended RPM: 18,000-20,000 (max 24,000) Engraving bit for small CNC machines, different angles of bits can be... View full product details
45° Engraving Bit
1/32" Flat Point, 1/4"SH
Materials: Natural woods, composite woods, hard plastics, soft plastics Recommended RPM: 18,000-20,000 (max 24,000) Engraving bit for small CNC machines, different angles of bits can be... View full product details
45° Lock Miter Glue Joint
1/2"SH, 3-1/8"LD
Materials: Natural woods, composite woods Recommended RPM: 10,000-12,000 (max 12,000) Use this 45° Lock Miter bit to make both cuts for connecting a joint... View full product details
45° Lock Miter Glue Joint
1/2"SH, 2"LD
Materials: Natural woods, composite woods Recommended RPM: 12,000-14,000 (max 16,000) Use this 45° Lock Miter bit to make both cuts for connecting a joint... View full product details
5pc Bearing Kit
Use this kit to vary the horizontal cutting depth of router bits with bearing pilots. Great for stepping in to finish depth by controlled increments. Contains B2 (3/8”), B3 (1/2”),... View full product details
60° V-Groove Bit
1/4"SH, 1/4"CD, 7/32"PL
Materials: Natural woods, composite woods, hard plastics, thin aluminum Recommended RPM: 18,000-22,000 (max 24,000) V-Groove bits are used for a variety of projects where a... View full product details
60° V-Groove Bit
1/4"SH, 1/4"CD, 7/32"PL
Materials: Natural woods, composite woods, hard plastics, thin aluminum Recommended RPM: 18,000-22,000 (max 24,000) V-Groove bits are used for a variety of projects where a... View full product details
60° V-Groove Bit
1/4"SH, 1/2"CD, 7/16"PL
Materials: Natural woods, composite woods, hard plastics, thin aluminum Recommended RPM: 16,000-20,000 (max 24,000) V-Groove bits are used for a variety of projects where a... View full product details
60° V-Groove Bit
1/2"SH, 1/2"CD, 7/16"PL
Materials: Natural woods, composite woods, hard plastics, thin aluminum Recommended RPM: 16,000-20,000 (max 24,000) V-Groove bits are used for a variety of projects where a... View full product details
7.5° Dovetail Bit
1/4"SH, 1/4"LD, 5/16"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Incra®/OmniJig® 43639. Also compatible with JoinTech™ system. Dovetail joints have traditionally stood as a... View full product details
7° Dovetail Bit
1/4"SH, 17/32"LD, 3/4"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) Dovetail joints have traditionally stood as a mark of craftsmanship to the woodworker. The interlocking... View full product details
7° Dovetail Bit
1/2"SH, 17/32"LD, 3/4"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For PC #43776PC. Dovetail joints have traditionally stood as a mark of craftsmanship to the... View full product details
7° Dovetail Bit
1/2"SH, 5/8"LD, 7/8"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Incra® and JoinTech™ system. Dovetail joints have traditionally stood as a mark of craftsmanship... View full product details
7° Dovetail Bit
1/2"SH, 3/4"LD, 7/8"DOC
Materials: Natural woods, composite woods Recommended RPM: 14,000-16,000 (max 18,000) For Incra® and JoinTech™ system. Dovetail joints have traditionally stood as a mark of craftsmanship... View full product details
7° Dovetail Bit
1/2"SH, 7/8"LD, 7/8"DOC
Materials: Natural woods, composite woods Recommended RPM: 14,000-16,000 (max 18,000) This is a cross reference for Stair Tread. Dovetail joints have traditionally stood as a... View full product details
808 Center Drill
1/4" x 6"
This 1/4" x 6" Drill Bit is a spare part to be used for the 808 series of Deep-Cor Hole Saws. The bit is also one of the accessories of... View full product details
8° Dovetail Bit
8mm SH, 1/4"LD, 1/4"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Leigh® #50 - 8mm shank. A premium quality Dovetail Bit made of solid carbide... View full product details
8° Dovetail Bit
1/4"SH, 1/4"LD, 1/4"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Leigh® #50 Dovetail joints have traditionally stood as a mark of craftsmanship to the... View full product details
8° Dovetail Bit
8mm SH, 3/8"LD, 1/2"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Leigh® #70 - 8mm shank Dovetail joints have traditionally stood as a mark of... View full product details
8° Dovetail Bit
1/4"SH, 3/8"LD, 1/2"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Leigh® #70 Dovetail joints have traditionally stood as a mark of craftsmanship to the... View full product details
8° Dovetail Bit
8mm SH, 7/16"LD, 5/8"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) Dovetail joints have traditionally stood as a mark of craftsmanship to the woodworker. The interlocking... View full product details
8° Dovetail Bit
1/4"SH, 7/16"LD, 5/8"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Leigh® #75 Dovetail joints have traditionally stood as a mark of craftsmanship to the... View full product details
8° Dovetail Bit
8mm SH, 1/2"LD, 13/16"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Leigh® #80 - 8mm shank Dovetail joints have traditionally stood as a mark of... View full product details
8° Dovetail Bit
1/4"SH, 1/2"LD, 13/16"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Leigh® #80 Dovetail joints have traditionally stood as a mark of craftsmanship to the... View full product details
