RU5200CB
Chipbreaker Up Cut Spiral
1/2"SH, 1/2"CD, 2"CL
Product Description
Each flute has small serrations to tear up the chips as the bit is cutting through the project. This bit has a feed rate in-between that of a roughing bit and a standard spiral router bit. Up cut spiral design provides the best control with hand or table routing pulling the chips up and away from the work material.
Similar Sizes
| Up Cut Part # | Down Cut Part # | Shank Dia. | Cutting Dia. | Cutting Length | Overall Length |
|---|---|---|---|---|---|
| RU5125CB | RD5125CB | 1/2" | 1/2" | 1-1/4" | 3" |
| RU5150CB | RD5150CB | 1/2" | 1/2" | 1-1/2" | 3-1/2" |
| RU5200CB | RD5200CB | 1/2" | 1/2" | 2" | 4" |
The above items are available from stock with chipbreakers. Chipbreakers can be added to any spiral bits upon request.
Related Items
Chipbreaker Down Cut Spiral
1/2"SH, 1/2"CD, 1-1/4"CL
Each flute has small serrations to tear up the chips as the bit is cutting through the project. This bit has a feed rate in-between that of a roughing bit... View full product details
Chipbreaker Down Cut Spiral
1/2"SH, 1/2"CD, 1-1/2"CL
Each flute has small serrations to tear up the chips as the bit is cutting through the project. This bit has a feed rate in-between that of a roughing bit... View full product details
Chipbreaker Down Cut Spiral
1/2"SH, 1/2"CD, 2"CL
Each flute has small serrations to tear up the chips as the bit is cutting through the project. This bit has a feed rate in-between that of a roughing bit... View full product details
Chipbreaker Up Cut Spiral
1/2"SH, 1/2"CD, 1-1/4"CL
Each flute has small serrations to tear up the chips as the bit is cutting through the project. This bit has a feed rate in-between that of a roughing bit... View full product details
