3242
Edge Beading Bit
1/2'SH, 1/8"BD, 9/16"CL
Product Description
Materials: Natural woods, composite woods, hard plastics
Recommended RPM: 14,000-16,000 (max 18,000)
An Edge Beading bit creates a bead on the edge of your work piece to soften the edge. The pattern leaves a half-rounded edge. Making two passes will make a 1/8" bead on the edge.
- TOOL SPECS: Carbide-tipped edge beading bit with 7/8" large diameter, 1/8" bead diameter, 9/16" cutting length, 1/2" shank, and 2-1/4" overall length for use with 1/2" collets. B3 bearing included.
- BEADING: Adds a raised, rounded bead profile to the edge of a workpiece, enhancing the look with a smooth, polished finish.
- APPLICATIONS: Perfect for use on furniture, cabinetry, picture frames, and trim carpentry, adding a precise, detailed touch.
- CARBIDE TIPPED: Offers an excellent balance of quality and cost, making it ideal for a wide range of applications.
- STEEL SHANK: The steel body creates a rigid tool with reduced vibration while the carbide cutting edges provide extended life.
- MATERIALS: Perfect for use on natural woods, hardwoods, and hard plastics, providing clean and precise cuts across a variety of surfaces.
Similar Sizes
| Part # | Large Dia. | Bead Dia. | Cutting Length | Overall Length |
|---|---|---|---|---|
| 1/4" SHANK | ||||
| 3240 | 7/8" | 1/8" | 9/16" | 2" |
| 3244 | 7/8" | 1/4" | 9/16" | 2" |
| 3248 | 1" | 5/16" | 5/8" | 2-1/4" |
| 3252 | 1-1/16" | 3/8" | 3/4" | 2-1/4" |
| 3256 | 1-1/16" | 1/2" | 3/4" | 2-1/4" |
| 1/2" SHANK | ||||
| 3242 | 7/8" | 1/8" | 9/16" | 2-1/4" |
| 3246 | 7/8" | 1/4" | 9/16" | 2-1/4" |
| 3250 | 1" | 5/16" | 5/8" | 2-1/4" |
| 3254 | 1-1/16" | 3/8" | 3/4" | 2-1/2" |
| 3258 | 1-1/16" | 1/2" | 3/4" | 2-1/2" |
| 3260 | 1-3/8" | 5/8" | 1" | 2-5/8" |
| 3262 | 1-1/2" | 3/4" | 1-1/8" | 3" |
Bearing Number: B3
Related Items
+5° Chairmaking Rabbet
1/2"SH, 1" CD, 5/8"CL
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 13,000-15,000 (max 18,000) These bits have a +5° angle on the cutting edge and were made specifically for cutting the... View full product details
-5° Chairmaking Rabbet
1/2"SH, 1" CD, 5/8"CL
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 13,000-15,000 (max 18,000) These bits have a -5° angle on the cutting edge and were made specifically for cutting the... View full product details
10° Dovetail Bit
8mm SH, 1/2"LD, 5/8"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Leigh® #101 - 8mm shank. Dovetail joints have traditionally stood as a mark of... View full product details
10° Dovetail Bit
1/4"SH, 1/2"LD, 5/8"DOC
Materials: Natural woods, composite woods Recommended RPM: 16,000-18,000 (max 24,000) For Incra®/Leigh® #101. Also compatible with JoinTech™ system. Dovetail joints have traditionally stood as a... View full product details
