2325
Edge Bevel
1/2"SH, 15°, 1"CL
Product Description
Similar to Chamfer bits, Edge Bevel bits provide a very small angle when used on your workpiece. This bit can also be used to make twelve sided boxes by using it to trim both ends of the side boards.
Materials: Natural woods, composite woods, hard plastics
Recommended RPM: 14,000-16,000 (max 18,000)
Similar Sizes
| Part # | Degree of Angle | Cutting Length | Cutting Height | Large Dia. |
|---|---|---|---|---|
| 1/4" SHANK | ||||
| * 2298 | 7° | 3/8" | 3/8" | 5/8" |
| 2300 | 15° | 1/2" | 1/2" | 7/8" |
| * 2300A | 15° | 1/4" | 1/4" | 3/4" |
| 2301 | 25° | 9/16" | 1/2" | 1" |
| 1 2308 | 30° | 7/8" | 3/4" | 1-3/8" |
| 1/2" SHANK | ||||
| 3 2325 | 15° | 1" | 15/16" | 1-1/8" |
| 2 2307 | 22.5° | 15/16" | 7/8" | 1-1/4" |
| 1 2309 | 30° | 7/8" | 3/4" | 1-3/8" |
| 2318 | 60° | 1-1/8" | 9/16" | 2-1/2" |
Bearing Number: B3
* Used on Laminate Trim
1 Used for six sided boxes
2 Used for eight sided boxes
3 Used for twelve sided boxes
Related Items
+5° Chairmaking Rabbet
1/2"SH, 1" CD, 5/8"CL
These bits have a +5° angle on the cutting edge and were made specifically for cutting the seat-to-leg tapered joints on "Maloof inspired" rocking chairs. See the... View full product details
-5° Chairmaking Rabbet
1/2"SH, 1" CD, 5/8"CL
These bits have a -5° angle on the cutting edge and were made specifically for cutting the seat-to-leg tapered joints on "Maloof inspired" rocking chairs. See the... View full product details
10° Dovetail Bit
8mm SH, 1/2"LD, 5/8"DOC
For Leigh® #101 - 8mm shank. Dovetail joints have traditionally stood as a mark of craftsmanship to the woodworker. The interlocking notches create... View full product details
10° Dovetail Bit
1/4"SH, 1/2"LD, 5/8"DOC
For Incra®/Leigh® #101. Also compatible with JoinTech™ system. Dovetail joints have traditionally stood as a mark of craftsmanship to the woodworker. The interlocking... View full product details
