Search
CNC Spoilboard Cutter
1/2"SH, 2"CD, 1/2"CL
Materials: Natural woods, composite woods, hard plastics, epoxy Recommended RPM: 12,000-14,000 (max 16,000) Designed for flattening tabletops, benchtops, and other wooden surfaces where you... View full product details
Spoilboard Cutter - Up Cut
3/4"SH, 4"LD, 3-Wing
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 10,000-12,000 (max 12,000) These large CNC Surfacing bits are designed to resurface your workpiece or CNC... View full product details
CNC Spoilboard Cutter
1/4"SH, 1"CD, 1/4"CL
Materials: Natural woods, composite woods, hard plastics, epoxy Recommended RPM: 14,000-16,000 (max 18,000) Designed for flattening tabletops, benchtops, and other wooden surfaces where you... View full product details
Spoilboard Cutter - Straight
1/2"SH, 2-1/2"LD, 2-Wing
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 10,000-12,000 (max 12,000) These large CNC Surfacing bits are designed to resurface your workpiece or CNC... View full product details
Spoilboard Cutter - Up Cut
1/2"SH, 2-1/2"LD, 2-Wing
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 10,000-12,000 (max 12,000) These large CNC Surfacing bits are designed to resurface your workpiece or CNC... View full product details
Spoilboard Replacement Insert
10 pc.
A 10 piece pack of Carbide Inserts to be used on Whiteside's large CNC Spoilboard Surfacing bits. TOOL SPECS: 14mm X 14mm X 2mm square carbide inserts in a convenient... View full product details
Spoilboard Cutter - Straight
3/4"SH, 4"LD, 3-Wing
Materials: Natural woods, composite woods, hard plastics Recommended RPM: 10,000-12,000 (max 12,000) These large CNC Surfacing bits are designed to resurface your workpiece or CNC... View full product details
Spoilboard Cutter
Wrench
A replacement insert wrench for the carbide inserts on Whiteside's large CNC Spoilboard Surfacing bits. TOOL SPECS: Insert wrench with T-15 Torx size. View full product details
Spoilboard Cutter
replacement screw
A replacement insert screw to hold the carbide inserts in place on Whiteside's large CNC Spoilboard Surfacing bits. TOOL SPECS: Replacement insert screw for use with SB Wrench. View full product details
The Works by Whiteside
14 Pieces
The Works by Whiteside is a deluxe selection of CNC focused tools offering a complete solution for cutting natural woods, composite woods, plastics,... View full product details
Nylon Ball Bearing
7/8"X15°OD, 3/16"ID
Used in solid surface cutting, these Nylon Ball Bearings are designed with a 15° angle. The non-mar nylon sleeve is great for working in dense material without leaving any scratches... View full product details
Nylon Ball Bearing
7/8"X18°OD, 3/16"ID
Used in solid surface cutting, these Nylon Ball Bearings are designed with an 18° angle. The non-mar nylon sleeve is great for working in dense material without leaving any scratches... View full product details
Nylon Ball Bearing
7/8"X10°OD, 3/16"ID
Used in solid surface cutting, these Nylon Ball Bearings are designed with a 10° angle. The non-mar nylon sleeve is great for working in dense material without leaving any scratches... View full product details
Round Stile & Rail Cutter Plywood Set
1/2"SH, 1/4" Reveal, 7/32" Tongue
Materials: Natural woods, composite woods Recommended RPM: 12,000-14,000 (max 16,000) This conversion kit is for cabinet door construction with undersized 1/4” plywood panels (Actual... View full product details
Square Ball Bearing
1/2"SQ, 3/16"ID
Here's a Square Deal! A quality Whiteside bit with the exclusive Euro Square Bearing. Replace the standard 1/2" bearing found on most of our Edge Form bits with the B3SQ... View full product details
Square Ball Bearing
3/4"SQ, 3/16"ID
Here's a Square Deal! A quality Whiteside bit with the exclusive Euro Square Bearing. Replace the standard 1/2" bearing found on most of our Edge Form bits with the B3SQ... View full product details
Composite Drill
1-5/16" Dia.
These drills have all the attributes of the 803 series but with a larger 1/4” diameter center hole as requested by several industrial users. This bit is supplied with a... View full product details
Transom Drill
9/16" Dia., 8"OAL
In conjunction with the marine industry, the transom drill was developed to eliminate the problems associated with drilling through fiberglass and wood. Due to the special parabolic flute design, chip... View full product details
Transom Drill
1" Dia., 8"OAL
In conjunction with the marine industry, the transom drill was developed to eliminate the problems associated with drilling through fiberglass and wood. Due to the special parabolic flute design, chip... View full product details
Self Clean Hole Saw
8-5/8" Dia.
The Self Clean™ Hole Saw brings about a new generation of hole saws. Marine manufacturers were consulted in their development. The tool saws faster than conventional hole saws plus saves... View full product details
Slotting Cutter Arbor
3/8"SH, 5/16"AD, 7/8"AL, 2-1/2"OAL
This arbor is designed for use with the 1-7/8" cutting diameter Slotting Cutters in the 6700 series. The arbor includes a B5 bearing for a 1/2" depth of cut. Add... View full product details
Composite Drill
1-3/16" Dia.
These drills have all the attributes of the 803 series but with a larger 1/4” diameter center hole as requested by several industrial users. This bit is supplied with a... View full product details
Slotting Cutter Arbor
1/4"SH, 5/16"AD, 7/8"AL, 2-3/8"OAL
This arbor is designed for use with the 1-7/8" cutting diameter Slotting Cutters in the 6700 series. The arbor includes a B5 bearing for a 1/2" depth of cut. Add... View full product details
Transom Drill
17/32" Dia., 8"OAL
In conjunction with the marine industry, the transom drill was developed to eliminate the problems associated with drilling through fiberglass and wood. Due to the special parabolic flute design, chip... View full product details
Slotting Cutter Arbor
1/2"SH, 5/16"AD, 7/8"AL, 2-5/8"OAL
This arbor is designed for use with the 1-7/8" cutting diameter Slotting Cutters in the 6700 series. The arbor includes a B5 bearing for a 1/2" depth of cut. Add... View full product details
Self Clean Hole Saw
8-1/2" Dia.
The Self Clean™ Hole Saw brings about a new generation of hole saws. Marine manufacturers were consulted in their development. The tool saws faster than conventional hole saws plus saves... View full product details
Sliding Compound and Radial Arm Saw Blades
10"OD, 80T, 5/8"B, COMBO
Manufactured with -5° hook to prevent grabbing, these blades offer outstanding performance on compound, radial and slide compound miter saws. The combination tooth design with 80 teeth provides flawless, ultra-smooth... View full product details
Slotting Cutter Arbor
1/2"SH, 5/16"AD, 7/8"AL, 4"OAL
This arbor has an extra long shank for extended reach and is designed for use with the 1-7/8" cutting diameter Slotting Cutters in the 6700 series. The arbor includes a... View full product details
Drawer Slot Cutter Arbor
1/4"SH, 3/8"-24THD
This Arbor is designed for use with the Drawer Slot Cutters in the 6800 series. TOOL SPECS: Solid steel drawer slot cutter arbor with 1/4" shank, 3/8" - 24 threads,... View full product details
Drawer Slot Cutter Arbor
3/8"SH, 3/8"-24THD
This Arbor is designed for use with the Drawer Slot Cutters in the 6800 series. TOOL SPECS: Solid steel drawer slot cutter arbor with 3/8" shank, 3/8" - 24 threads,... View full product details
Drawer Slot Cutter Arbor
1/2"SH, 3/8"-24THD
This Arbor is designed for use with the Drawer Slot Cutters in the 6800 series. TOOL SPECS: Solid steel drawer slot cutter arbor with 1/2" shank, 3/8" - 24 threads,... View full product details
Ball Bearing
1-1/2"OD, 1/2"ID
Ball Bearings are used on a router bit to follow a template or the flat edge of your workpiece. The inside of the bearing has several metal balls that allow... View full product details
Ball Bearing
13/16"OD, 3/16"OD
Ball Bearings are used on a router bit to follow a template or the flat edge of your workpiece. The inside of the bearing has several metal balls that allow... View full product details
Nylon Ball Bearing
1/2"OD, 3/16"ID
These Nylon Ball Bearing are designed with a non-mar nylon sleeve and are great for working in dense material without leaving any scratches or rubbing. TOOL SPECS: Non-mar nylon sleeve... View full product details
Ball Bearing
1/4"OD, 1/8"ID
Ball Bearings are used on a router bit to follow a template or the flat edge of your workpiece. The inside of the bearing has several metal balls that allow... View full product details
Plunge Panel Bit
1/2"SH, 1/2"CD, 1-1/4"CL
Materials: Natural woods, composite woods, hard plastics, thin aluminum Recommended RPM: 16,000-18,000 (max 24,000) Panel bits were created to be used with a pilot guide... View full product details
Plunge Panel Bit
1/2"SH, 1/2"CD, 1-1/4"CL
Materials: Natural woods, composite woods, hard plastics, thin aluminum Recommended RPM: 16,000-18,000 (max 24,000) Panel bits were created to be used with a pilot guide... View full product details
Slotting Cutter
5/16"B, 0.070"CL, 3-Wing
Materials: Natural woods, composite woods Recommended RPM: 12,000-15,000 (max 16,000) Straightforward and easy to use, this 1-7/8" diameter slotting cutter makes a small slot... View full product details
High Speed Steel Countersink #10
Whiteside’s 82° Countersink Heads are designed to slip over the drill bit and affix with dual set screws into the flutes. Adjust the drilling length by sliding the head up... View full product details
High Speed Steel Countersink #12
Whiteside’s 82° Countersink Heads are designed to slip over the drill bit and affix with dual set screws into the flutes. Adjust the drilling length by sliding the head up... View full product details
Ball Bearing
1-1/4"OD, 1/2"ID
Ball Bearings are used on a router bit to follow a template or the flat edge of your workpiece. The inside of the bearing has several metal balls that allow... View full product details
Plunge Panel Bit
1/4"SH, 1/4"CD, 7/8"CL
Materials: Natural woods, composite woods, hard plastics, thin aluminum Recommended RPM: 18,000-20,000 (max 24,000) Panel bits were created to be used with a pilot guide... View full product details
Ball Bearing
1-1/8"OD, 5/16"ID
Ball Bearings are used on a router bit to follow a template or the flat edge of your workpiece. The inside of the bearing has several metal balls that allow... View full product details
Ball Bearing
1-3/8"OD, 5/16"ID
Ball Bearings are used on a router bit to follow a template or the flat edge of your workpiece. The inside of the bearing has several metal balls that allow... View full product details
Plunge Panel Bit
1/4"SH, 1/4"CD, 3/4"CL
Materials: Natural woods, composite woods, hard plastics, thin aluminum Recommended RPM: 18,000-20,000 (max 24,000) Panel bits were created to be used with a pilot guide... View full product details
High Speed Steel Countersink #8
Whiteside’s 82° Countersink Heads are designed to slip over the drill bit and affix with dual set screws into the flutes. Adjust the drilling length by sliding the head up... View full product details
Ball Bearing
7/8"OD, 1/2"ID
Ball Bearings are used on a router bit to follow a template or the flat edge of your workpiece. The inside of the bearing has several metal balls that allow... View full product details
Ball Bearing
7/8"OD, 3/16"ID
Ball Bearings are used on a router bit to follow a template or the flat edge of your workpiece. The inside of the bearing has several metal balls that allow... View full product details
